Docs › Images › Painting: Brush, Eraser, Clone & Liquify
Painting: Brush, Eraser, Clone & Liquify
Brush paints on the selected layer. Paint on a Drawing layer of its own to keep the photo underneath untouched.
- Brush, Blur, Liquify, Metal, Liquid and Pixel share one spot on the rail: point at it to pick another. Clone, Heal and Spot heal share the spot below it.
- Pick a color: press the color swatch for the picker, or tap one of your colors, the theme's or a recent one. The eyedropper picks a color from anywhere on screen. The color is shared by every brush.
- Then a brush, on the Brushes tab: round, pencils, charcoal and pastel, crayons, inks, pens and markers, paints, blending brushes, palette knives, watercolor or airbrushes. Recent holds the last ones you used. Each brush keeps its own settings.
- Size runs 0.1–1000 px, with [ and ]. Under 1 px, lines get fainter, not thinner. Hold Cmd/Ctrl+Option/Alt and drag on the picture: sideways sets the size, up and down the opacity.
- The bar at the top of the canvas has the brush, its color, size, opacity and Paint / Blend / Erase, so the panel can stay closed. Its sun button, and Dry layer at the top of the brush panel, dry the paint on the layer now, watercolor included: what you paint next goes over it and no longer mixes with it. Its last button hides it to a small chip; the chip brings it back.
- Drag on the picture to paint.
- Blend on the bar picks up a tool that moves the paint already there, and shows all five: Soft softens colors into each other where they are, Smudge pushes them along like a finger, Bristle pulls them in streaks, Knife lays paint with a blade and mixes it into the colors it crosses, and Scrape gathers paint as it drags and leaves some behind. They work on wet and dry paint. Press harder to blend harder. Paint goes back to the brush you had.
- A watercolor has four techniques over its brushes: Wet on wet, Wet on dry, Dry on wet and Dry on dry (thick paint that covers what is beneath), and Blend, a clean damp brush that softens what is there. Wetness under them sets how much water the brush carries: a wetter brush's paint runs, bleeds and stays workable longer; a nearly dry one's stays where it is put. Under Variance, Hue, Luminosity, Thickness and Wetness set how far each stroke's color, width and wetness stray from what you picked. A quick stroke keeps a tighter edge than a slow one, and a long stroke fades as the brush runs out.
- A blender's Stamp, on the Shape tab, gives the blend its grain: a sponge blends in pores, bristles in lines. Texture sets how much of the grain shows.
- To paint inside shapes you drew, press Select on the bar (or in the panel) and tap each shape: it gets a blue outline. Select and + turn green while you select, and the pointer is a crosshair. With + on, each tap adds a shape; turn + off and a tap picks a new one instead. Hold Option/Alt as you tap to take a shape away. Then press Paint or Erase: every stroke stays inside the shapes. On an iPad, once you have drawn with the Pencil, tap shapes with your finger. On a phone, Select is under More. Press × to let the shapes go.
- The paint bucket fills the shapes with the brush color. Rest the pointer on it (on a touch screen, press and hold) for more: a color, a gradient from the brush color, or a material. You rarely need the arrow beside Select: when a shape runs out to the edges of the picture through a break in its lines, it closes wider breaks by itself and says so. The arrow sets Close gaps (Off, Small, Medium, Large or a size: the widest break in the lines that still closes the shape, as in Fill), Tolerance, Under lines, Smooth, Fill holes (shapes inside it join it) and Reference layer (while a layer is your reference, find the edge in its lines). A change moves the edge you just picked.
- Opacity is the most a stroke lays down; Flow is how quickly it builds up to it.
- Stabilizer steadies a line: Smooth, or String, which trails the pen.
- Symmetry, in the top row of each brush, mirrors strokes left–right, top–bottom, four ways or around a center. Drag the center on the canvas to move it; Lock keeps it in place, and Hide axis takes its lines off the picture.
- Nodes are more centers to paint around. Turn on Add node and click anywhere on the picture: each click sets a radial center exactly there. Press Done or Esc to paint again, or hold Option/Alt+Shift and click at any time. A stroke follows the center nearest where it starts, counting the main Symmetry when it's on.
- With Symmetry on, each node also sits in every slice of it, turned or mirrored with the slice. A stroke at any of those places paints the same picture, and dragging one moves them all. Repeat turns that off for one node. A node on the center of the Symmetry stays single. A stroke paints at most 128 copies; past that, a node has fewer arms, and every place still paints.
- Pick a node by its number or by the square at its center. Drag the center to move it and the square above it to rotate it. Each node has its own symmetry and Rotation. Give one a round or box area and it takes the strokes that start inside it, ahead of any center, the smallest first: drag its corner squares to resize it, and Clip keeps the stroke and its copies inside. To remove one, press Delete or right-click its center.
- On the Pen tab, Guide keeps strokes on perspective lines, an ellipse or parallel lines.
- Also on Pen: Apple Pencil pressure and your speed can change size and flow.
- Clone paints with pixels from another spot: Option/Alt-click the source, then paint.
- Aligned moves the source with you; Fixed restarts from your spot. Sample All copies the whole picture; Sample Current, the selected layer.
- Heal copies the source's texture but not its light and color: when you lift, the stroke takes on the color around where you painted, so a patch of skin or sky doesn't show. It works on an upright Drawing layer; on others the stroke stays a plain clone.
- Spot heal needs no source. Paint over a spot, a wire or a scratch, and when you lift it's filled from the picture around it, on a Spot heal layer. While that layer is selected, more spots go on it. Sample All fills from what you see; Sample Current, from the selected layer.
- Heal and Spot heal copy only the picture's own pixels, with no AI, so they keep the layer's label.
- Metal paints thick metal or glass that catches the light and casts a shadow; each new stroke lies on top of what is there. The picture at the top of the panel is the stroke your settings will lay, and it follows every control as you move it. Choose Metal or Glass at the top, then the color; the arrow beside it opens your saved, theme and recent colors. Pick a look (Silver, Chrome, Gold, Brass, or Clear, Frosted, Amber, Cobalt; More shows the rest): each look's picture is one stroke as your settings would lay it in that metal or glass. Then pick one of eight Stroke options: Chased, Wire, Ribbon, Molten, Beaded, Studs, Quill and Thorn. The panel shows the one in hand and the one you used before it; More shows the rest. Beaded and Studs always rest on top of the metal they cross, whatever Overlap is set to, and Spacing sets how far apart their beads sit. Then set its Roughness, Texture (Brushed runs along each stroke), Patina, Thickness and Melt. Overlap says whether strokes melt together (Combine) or lie one over the other (On top). Etch works the metal already there: Cut carves a groove, Pinch sharpens an edge, Flatten presses a rounded back flat, and Texture works Brushed, Hammered or Frosted into the surface where you draw (Smooth polishes one away). Each pass adds to the last. Grab moves metal: press on a stroke and drag, and it comes along with everything joined to it; set it down on other metal and the two become one piece.
- Branches grows twigs off a Metal stroke as you draw, and some twigs grow their own; Branch length and Branch curl set how far they reach and how much they bend. They follow Symmetry up to 48 copies, and one undo takes the stroke and its twigs.
- Metal's Light tab (rotation, height, strength, softness, color, and the Shadow's opacity, distance and blur) is shared by all the metal and glass in the picture. It stays live: change what is beneath and the glass and the metal's edges show it.
- Liquid is paint that keeps moving after it lands. With Run on it trickles away from the stroke: the Direction dial sets the way, straight down to start with, and Amount, Viscosity, Run length and Wander set how much runs, how fast, how far and how unevenly. Runs pick up the colors they flow through and carry them along, so colors marble where they meet. Each stroke, with everything that ran from it, is one undo step, and paint that's still moving stops where it is when you use any other tool.
- Press Splat and each press hits the page and spreads, throwing droplets. Apple Pencil pressure or a fast hand hits harder; Force and Droplets set the size and the spray.
- Liquid has the Brush's Shape, Pen and Grain settings too, and its strokes taper, vary in width and run heaviest where the most paint went down.
- Pixel paints hard-edged squares on a grid. Pixel size sets how big a square is, and Size how wide the line is, always a whole number of squares. Erase takes squares away one at a time. The bar at the top of the canvas has its color, Size, Pixel size, Height, Paint / Erase, and Play / Pause for the physics.
- Presets, under the color, set a kind of physics with its colors and material in one press: Sand and Water show, and More opens Kinetic sand, Rock, Sorbet, Lava, Candy, Plants, Fireworks and Neon rain. They leave the size, the grid, the look and the nib alone. Default, beside More, puts the whole brush back as it starts.
- Clear pixels?, at the top of the panel, clears everything on the layer. Undo brings it back.
- On the Look tab, pick what a square is: Block, Round, Stud, Cube, Sunken or Voxel, a solid cube with walls, a rim that catches the light and soft shade in the corner beside a taller one. Height sets how far it stands up: its sides toward the light are brighter and the others darker, and it casts a shadow. At 0 the squares are flat color.
- Overlap sets how squares meet. On top: every square is a block of its own, and a square painted over another stands on it and casts its shadow on the squares beside it. Combine: squares that touch become one raised shape.
- On the Brush tab, pick the nib: Round, Square, Dither (every other square) or Spray, a speckle that fills in as you go over it; Density sets how thick. With Apple Pencil, Pressure widens the line as you press.
- Also on the Brush tab: Taper thins the line to a single square at both ends, Speed makes it thinner the faster your hand goes, and Jitter lets its width wander.
- On the Color tab, one stroke can lay up to five colors: Along the stroke, Across it, from its Center out, Mixed, each square at random, or by Height. Gradient blends from one color to the next; off, each color keeps its own band. A single press works too.
- Height colors a square by how high on the page it is, counted up from the bottom, with Length rows in one run of the colors; all the way up, one run covers the whole page. With Physics, a square takes the color of the height it lands at, so a heap is striped like poured sand; bands have a slight wave in them.
- Shimmer keeps the squares' color gently moving, with a net of light wandering over it; a pool is lit at its surface and darker below. It shows on squares that stand up, and an export is a still of it.
- Pixel's Light tab is the same light as Metal's: Rotation, Height, Strength, Ambient, and the Shadow and its Distance. Turn it and every block in the picture follows.
- Material, on the Look tab, sets what the squares are made of: Flat, Plastic, Worn or Matte. It changes only how they catch the light, so no two bricks look quite alike; the color stays as painted. It shows on squares that stand up.
- On the Physics tab, the squares are let go, and everything already on the layer is the ground. Sand falls and piles up. Water falls and flattens at once to a level; sand sinks through it, and it splashes: what lands in it throws the surface up, and a drop leaps where it lands on anything else. Lava is a slower liquid. Rock is rigid: a piece holds its shape, stays if it stands on something and falls whole if it does not. Bounce bounces off what it hits. Burst is thrown out in every direction and then falls. Splatter is thrown out and stays where it lands. Explode lays nothing: it destroys what is painted under the brush, which flies apart and is gone.
- Where lava and water meet, the water boils away as steam and the lava turns to stone, which falls and lies where it lands.
- Gravity sets how hard the squares are pulled down the page, and Force how much of your hand's speed they take with them. Splash sets how much is thrown up where a square lands, from none to a lot. Velocity gives every square a first push, the way Direction points. For Rock, Force is how much of it breaks off. Color sets what a moving square's color follows: Time turns it through the brush's other colors as it flies, and Speed makes it lighter the faster it goes, fading back slowly, like foam.
- Play and Pause start and hold the physics. All pixels, off at first, lets everything on the layer take part. What is already there stays where it is until the physics reaches it: an Explode over it, or what held it up going. Then it falls as sand. Squares laid with Physics off fall as sand too, and nothing new is rigid.
- When more is moving than the device can run, the bar says Too many moving or Running slow: new squares wait until some come to rest. A phone, a tablet or a slower computer runs fewer at once.
- Hold still and the brush keeps pouring. Squares let go over paint land on top of it. Squares at rest move again when the space beside or under them opens, so a heap slumps when its foot is taken away. A whole fall is one undo step.
- Physics is off through a selection, on a layer with Alpha lock on and on a turned layer: there the squares stay where you lay them.
- Hold still at the end of a stroke and a wobbly line becomes a straight one, as with the Brush. With Physics on, a hold pours instead.
- Blur blurs or smudges parts of the selected layer. Blur softens, more each time you go over a spot and the harder you press with Apple Pencil. Smudge pulls colors along the stroke; Length sets how far, up to 512 px. Restore paints both away. Size and Strength set the brush.
- Blur and smudge are kept on the layer, not in its pixels. The tool's button has a green mark while the selected layer carries any; in its panel, Off shows the layer as it was and Reset takes them off. Paint laid on a blurred or smudged area is changed the same way. Where smudge strokes cross, the later one takes over.
- Liquify pushes the picture like wet paint: Push, Twirl, Twirl back, Pinch, Bloat, and Restore to paint it back. Size and Strength set the brush; each stroke is one undo step.
More about brushes
- Shape sets the stamp, spacing and angle; Paint, how paint mixes and dries; Grain, the paper texture.
- Save brush keeps the brush in hand under Yours; Reset puts it back. The library, under Shape › All stamps, imports Procreate (
.brushset,.brush), Photoshop, GIMP and Krita brushes, or a picture as a tip. - A Procreate brush brings its shape and grain, and the settings Images has too: spacing, jitter, StreamLine, the opacity limit, pressure, speed and tilt, taper, rotation and grain scale and depth. The library lists what didn't come, such as size limits, wet mix and Procreate's built-in shapes and grains, which aren't in the file.
- Pen pressure sets how hard you press for a full stroke, on this device, for every brush in every app. The same curve is in File › Preferences… › Stylus.
- Crayon: wax catches the paper's grain, leaving white where it skips; press lightly for a broken, grainy line. Wax for bold color, Sharp for hatching and detail, Burnish to press layers together.
- Mixing paints stay wet; Dries in sets how long.
- Hold to snap shapes: hold still after a line, arc, circle or box for a clean one. Shift makes a circle, square or 15° line.
Eraser
Erase, at the top of the brush's settings (or Eraser), erases with the brush in hand: its stamp, texture and pen settings. It keeps its own size, opacity and smoothing. On a picture it hides through the mask, so nothing is lost; a mask is erased with a round tip.