Metal
Metal paints raised metal in 3D space: lines, wires, ribbons and beads of silver, gold, brass and more. Draw on an object and the metal lies on it. Draw in the air and it hangs in space. The scene's lights light it, and it renders and exports like any other object.
Press 3D Paint on the rail and pick Metal at the top of its panel. Every stroke goes into one Metal object. With one selected, strokes go into it. With none selected, your first stroke makes one.
Where the metal goes
The brush follows the pointer.
- On an object, the stroke lies on its surface: over a sphere, across a box's edge and down its side.
- In the air, it lands on the drawing plane. View faces you at a distance. XY, YZ and XZ are the axis planes; XZ is level, like the ground. Surface lies on an object you click.
- A stroke that runs off an object carries on in the air at the depth where it left. One that runs onto an object lies on it.
You can always see where a stroke will land:
- the ring under the pointer is blue on an object and amber in the air;
- in the air, the plane shows as a grid, and a dashed line drops to the ground;
- a label by the pointer says where you are, such as "On Sphere" or "In the air · 1.20 m away";
- the object the stroke will land on is outlined in blue, and the panel names it: "On Sphere", then "Painting on Sphere" while you draw.
What you see while you draw is the stroke you get: it looks the same once you let go.
The drawing plane
The drawing plane is a framed grid in the view, in its own color: amber for View, blue for XY, red for YZ, green for XZ and violet for Surface. Its handle sits in the middle:
- Drag the middle knob to move the plane. On a View plane, drag up to send it further away and down to bring it closer.
- Drag the arrow to push the plane along its facing.
- Drag a ring to turn the plane: the two upright rings tilt it, the flat one turns it in place. A turned plane becomes a Surface plane.
The bar under the plane swaps it: View, XY, YZ, XZ, or Surface, then click an object to lay the plane on it there. Reset puts it back in front of you, and the lock keeps it where it is. Q swaps to the next plane and Shift-Q to the one before. Option-scroll in the view pushes the plane away or pulls it closer, and Center in the panel puts it through the middle of the view.
A press on an object moves the plane there, so your next stroke in the air starts where you were working, unless the plane is locked. Snap applies to the handle when it's on: moves step by the snap's move step and turns by its rotate step, and Shift flips snap as it does for the move tool. Each drag, swap or reset is one undo step, and the scene keeps its plane when you save it.
What a stroke looks like
- Metal picks the material: Silver, Chrome, Gold, Brass, Copper, Bronze, Steel, Pewter or Iron. Color tints it any color.
- Stroke picks the shape:
- Chased: a swelling ridge, pointed at both ends.
- Wire: thin, round and even.
- Ribbon: a flat strip.
- Molten: fat and pooling.
- Beaded and Studs: rows of domes.
- Quill: a broad nib.
- Thorn: a heavy head running out to a hair.
- Size is the stroke's width in the scene's units, the same wherever it goes. [ and ] make it smaller or bigger.
- Overlap: with On top, a new stroke lies over the metal already there. With Combine, strokes run into each other.
- Surface:
- Smooth, Brushed, Hammered and Frosted change how the metal catches the light, never its color.
- Roughness blurs the reflections.
- Patina tarnishes the metal where it meets what it lies on, and rubs its top bright.
- Detail lets the stroke wander a little.
- Thickness and Edge set how tall it stands, and whether it's round or flat-topped.
Erase takes metal away where you brush: it cuts strokes in two where it crosses them. Each stroke is one step to undo.
You can't paint while the view is in WeekendRENDER: the panel says so, and Switch to Lit brings the view back where painting works.