Weekend Studio

Docs › 3D › Landscape

Landscape

A landscape is a patch of ground: hills, mountains, terraces, or a real place. Press Landscape on the rail; it is the way to add one. With a landscape selected, its tool opens on it; with none selected, a new one is added. The tool has three parts across the top: Base, Sculpt and Import.

Base

Width, Depth and Height are the size of the patch, from its lowest point to its highest. Segments is how many rows of points it is built from; the lock sets both directions together, and opening it shows Width Segs and Depth Segs. Style shapes the hills: Rolling, Ridged (sharp crests) or Terraced (flat steps); Sharpness says how narrow the crests or the terrace edges are (lower is softer). Edges Down slopes the border to the ground so the patch has no cliff around it. Feature Size is how far apart the big hills are, Detail adds finer bumps, Roughness says how strong they are, Sea Level flattens the low ground and Seed gives another landscape.

Sculpt

Drag on the landscape to shape it. Raise and Lower push the ground up or down, Smooth evens it out, Flatten levels it to the height where the stroke began (a plateau or a terrace), Roughen adds rocky noise and Erode lets steep slopes slump and rain carve small gullies. Radius, Strength and Falloff set the brush; [ and ] resize it while you work, with Shift for the strength, and Shift on its own smooths with any brush. With a pen, a light touch is a weak stroke.

Each stroke is one undo step. Sculpting sits on top of the terrain, so changing Height, Style or Seed afterwards changes the land under it and keeps your strokes. Clear sculpting takes them all off.

Import

Find a place by name, or type a latitude and longitude. The small map shows streets, towns and parks, and moves like any web map: drag it, scroll or pinch to zoom. Click the map to move the area there, or drag the area and its corners; the chips under the map set its size, which is written on it. The button in the map's corner switches to Terrain, the shape of the ground. Real size makes the landscape as wide, deep and high as the place; Keep width keeps this landscape's width and scales the rest to match. Relief stretches the heights. Areas can be up to 150 km across.

The heights come from Terrain Tiles on AWS Open Data, built by Mapzen from the U.S. Geological Survey, NASA's SRTM, NOAA and national mapping agencies; the credit stays with the landscape, and Sources at the foot of the tab lists every source. Only the shape of the land is imported, not pictures of it. An imported area comes in as it is. In Base, Ridged sharpens its crests and Terraced cuts it into steps, by Amount (0% leaves the place as it is), and Added Detail lays noise over it, shaped by Feature Size, Detail, Roughness and Seed. Sculpting works on top of an imported area too, and Use the noise instead goes back to Base's hills. Place search uses OpenStreetMap data through Photon.

Streets and buildings

Under the terrain, Streets and buildings brings in OpenStreetMap for the same place and area: roads, buildings, and if you turn them on, water, parks and rail. You can also get here from Streets from map in the Add list, or File › Import › Streets (OpenStreetMap)…; neither adds a landscape. With an imported landscape selected they're laid on its ground, lined up with it; with no landscape selected they go on flat ground at real size. Choose which roads you want (Paths are off at first, because many cities map every sidewalk and crosswalk), press Look first to count what's there, then Import streets. Streets take an area up to about 1 km²; Use 1 km in the middle shrinks a bigger one. Up to 600 roads and 1,500 buildings come in, the biggest first, and the panel says when some were left out.

Everything arrives in one Streets group, inside the landscape so it moves with it. Each kind of road is a Road with one spline per street: move a spline's points and its road follows. Roads get their width from the map, or from their number of lanes, and they're drivable in Play. Where roads meet there's a flat patch. Buildings rise to their height (3 m a story when the map has no height). With Facades on (the start), each building wears windows, floors and a ground floor that suit its kind: houses, shops, offices, flats or sheds, a few looks of each, with dark roofs. Off gives plain walls. A look is a material in the scene, so changing it changes every building wearing it.

Dress the streets puts an object along the roads: pick Lamps, Trees or Barriers to start from, any object in the scene (a Library model too), which roads, the Spacing, how far it's Set back from the edge and which Side. It's a Cloner along the roads, so its Step and Rotate Y change them all. Replace buildings swaps the footprints for models you pick, each scaled to its footprint: Stretch fits it exactly, Keep shape keeps the model's proportions. Houses replaces only the small ones. Each model becomes an instance, so editing it changes every building made from it.

The map data is © OpenStreetMap contributors. The panel shows that, and Credit on renders puts it in the corner of Render Frame pictures and turntables of the scene. It's on to start with.

The landscape looks the same in 3D, in WeekendRENDER and in exports.

Brushes don't work while the view is in WeekendRENDER: the panel says so, and Switch to Lit brings the view back where they do.

Open 3D, free

← SculptTrack →